DeVille DHS V8-4.6L VIN Y (2000)
3. Position the camshaft cover downward over the camshaft drive end.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the nine camshaft cover bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
5. Lubricate the seal lips.
6. Install the new camshaft seal (1) to the end of the intake cam.
7. Seal the bolt threads with sealer GM P/N 1052080.
Tighten the bolts to 3 Nm (27 inch lbs.).
