DeVille DHS V8-4.6L VIN Y (2000)
3. Install the nine camshaft cover bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
4. Install the spark plug boots onto the coil cassette.
Ensure that the boots are fully seated against the cassette.
5. Install the ignition coil cassette. Refer to Coil Cassette Replacement - Bank 2.
6. Install the AIR control valve bracket. Refer to Secondary AIR Injection Control Valve Replacement - Bank 1.
7. Connect the cable harness clips to the cable harness at the front of the camshaft cover.
8. Connect the AIR vent solenoid electrical connector.
9. Connect the vacuum tubes to the AIR vent solenoid.
10. Connect the oxygen sensor wire.
11. Connect the PCV valve (1) to the camshaft cover (2).
