DeVille DHS V8-4.6L VIN Y (2000)
10. Remove the camshaft sprocket retaining bolts from all four camshafts. Use an open wrench on the hex cast near the front of each camshaft to
prevent the engine from rotating when loosening the camshaft sprocket bolts.
11. Lift the right secondary drive chain from the sprocket teeth and slide the camshaft sprockets off of the camshafts.
Allow the right chain to fall into the front cover area.
12. Remove the right secondary drive chain from the engine block.
13. Lift the left secondary drive chain from the sprocket teeth and slide the camshaft sprockets off of the camshafts.
Allow the left chain to fall into the front cover area.
14. Remove the left secondary drive chain from the engine block.
Installation Procedure
