DeVille DHS V8-4.6L VIN Y (2000)
1. Partially install the defroster grille.
2. Reconnect the sunload sensor electrical connector (2) to the sunload sensor (1).
3. Insert the forward edge of the defroster grille (1) to the IP.
Align the defroster grille with the IP opening.
4. Press down along the rear edge of the defroster grille (1) in order to engage the retainer clips.
For a description of the RPO Code(s) shown in this image/article refer to the RPO Code List found at Vehicle/Application ID See: Application and
ID/RPO Codes
