DeVille DHS V8-4.6L VIN Y (2000)
5. With the fuse block turned over, plug the electrical connectors into the fuse block.
6. Install the underhood fuse block into the base assembly.
Ensure all four of the fuse block hold down clips are engaged.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the three fasteners, which secure the fuse block to the harnesses, to 6.5 N.m (58 lb in).
7. Install the positive battery cable and fastener to the rear fuse block.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fastener to 15 N.m (11 lb ft).
8. Install the underhood fuse block cover.
9. Connect the negative battery cable from the battery.
