DeVille DHS V8-4.6L VIN Y (2000)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing/Hub Replacement - Rear (FE1, FE3)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the wheel and tire. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove two bolts from brake caliper and hang away from rotor. Refer to Brake Caliper Replacement - Rear (Without J55) or Brake Caliper
Replacement - Rear (J55) in Brakes and Traction Control.
4. Remove the brake rotor. Refer to Brake Rotor Replacement - Rear (Without J55) or Brake Rotor Replacement - Rear (J55) in Brakes and Traction
Control.
5. Disconnect the ABS sensor wire connector.