DeVille DHS V8-4.6L VIN Y (2000)
3. Install the throttle body assembly (1).
4. Install the TP sensor electrical connector (2) to the TP sensor (3).
5. Install the IAC electrical connector (1) to the TP sensor (4).
6. Connect the negative battery cable.
7. Install the rear seat cushion.
8. Install the intake manifold sight shield (1) to the engine.
9. Install the intake manifold sight shield nuts (2) to the intake manifold (1).
Tighten
Tighten the intake manifold sight shield nuts to 3 N.m (27 lb in).
10. Perform the TP Sensor learn procedure.
