DeVille DHS V8-4.6L VIN Y (2000)
9. Remove the fuel rail end-point bracket retainer nut.
10. Remove the fuel injector electrical connectors from the fuel injectors.
11. Lay the harness aside.
12. Remove the fuel rail attaching bolts (2).
13. Raise the fuel injectors from the intake manifold with J43013.
IMPORTANT: Store the fuel rail assembly in a clean secure location away from heat sources.
14. Lift the fuel rail and remove the fuel rail.
15. Remove the injector lower O-ring seal from the spray tip end of each injector.
16. Discard the O-ring seals.
INSTALLATION PROCEDURE
