DeVille DHS V8-4.6L VIN Y (2000)
1. Install the new fuel feed, fuel return (7), and the attaching hardware as noted during removal.
2. Remove the caps from the in-line fuel filter pipes and the fuel sender fuel pipes.
3. Install new plastic connector retainers on the in-line fuel filter pipes and on the fuel sender fuel pipes.
4. Connect the fuel feed (5) and fuel return (6) quick-connect fittings.
5. Install the fuel tank (3).
6. Add fuel to the fuel tank.
7. Install the fuel tank filler pipe cap (1).
8. Tighten the fuel tank filler pipe cap.
9. Connect the negative battery cable.
10. Inspect for leaks.
10.1. Turn the ignition switch ON for 2 seconds.
10.2. Turn the ignition switch OFF for 10 seconds.
10.3. Turn the ignition switch ON position.
10.4. Check for fuel leaks.
