DeVille DHS V8-4.6L VIN Y (2000)
10. Install the transaxle shift cable clip (1) to the accelerator controls cable bracket.
11. Install the fuel feed and return lines from the retainer (5) on to the accelerator controls cable bracket.
12. install the MAF sensor electrical connector to the MAF sensor.
13. Remove the IAT sensor electrical connector (1) from the IAT sensor.
14. Install the air cleaner intake duct clamp to the air cleaner intake air duct (2).
Tighten
Tighten the air cleaner intake duct clamp(s) to 4 N.m (35 lb in).
