DeVille DHS V8-4.6L VIN Y (2000)
Body Control Module: Removal and Replacement
Dash Integration Module Replacement
REMOVAL PROCEDURE
IMPORTANT: Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module
(1) has been replaced.
1. Remove the right sound insulator.
2. Disconnect the DIM module electrical connectors (2).
3. Depress inward on the locking tab (2).
4. With the locking tab (2) depressed, slide the DIM module (2) downward.
5. Remove the DIM module (1) from the bracket.
INSTALLATION PROCEDURE