DeVille DHS V8-4.6L VIN Y (2000)
Intake Air Temperature (IAT) Sensor: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the MAF/IAT sensor electrical connector.
2. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.
NOTE: Refer to MAF and Screen Notice in Service Precautions.
3. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct.
INSTALLATION PROCEDURE
NOTE: Refer to MAF and Screen Notice in Service Precautions.
1. Carefully install the MAF/IAT sensor into the air cleaner and intake air duct.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct.
Tighten
Tighten the clamps to 3 N.m (26 lb in).
3. Reconnect the MAF/IAT sensor electrical connector.
