DeVille DHS V8-4.6L VIN Y (2000)
1. Install the CVRSS module (1) to the bracket.
2. Slide the CVRSS module (1) away from the center of the vehicle until it is fully engaged.
3. Connect the CVRSS module electrical connector (2).
4. Reposition the rear seat back insulator.
5. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
6. Perform the CVRSS module Calibration. Refer to Electronic Suspension Control Module Calibration. See: Testing and Inspection/Programming
and Relearning