cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Part 1 of 4|Page 11215 > < Part 1 of 4|Page 11213
Page 5
background image

58. Route the deployment harness out of the passenger side of the vehicle.

59. Disconnect the passenger side air bag/ pretensioner yellow 6-way connector (1) from the vehicle wiring harness (2) located under the driver seat.

60. Cut the tour SIR wires (2 for side air bag and 2 for pretensioner) leading to the yellow 6-way harness connector from the vehicle, leaving at least 

16 cm (6 in) of wire at the connector.

61. Strip 13 mm (0.5 in) of insulation from all four SIR wires connector leads (2 for side air bag and 2 for pretensioner).

Part 1 of 4|Page 11215 > < Part 1 of 4|Page 11213