DeVille DHS V8-4.6L VIN Y (2000)
5. Route the inflatable restraint IP module wiring harness (2) in place to secure inflatable restraint IP module yellow connector clip to IP (3).
6. Install the IP upper trim pad.
7. Clip the inflatable restraint IP module yellow connector (2) to IP bracket (3).
8. Install the inflatable restraint IP module yellow connector (2) to the vehicle harness yellow connector (1).
9. Install the Connector Position Assurance (CPA) (4) to the inflatable restraint instrument panel (IP) module connector (2).
10. Install passenger (right) insulator panel.
11. Enable the SIR system. Refer to Enabling the SIR System.
