DeVille DHS V8-4.6L VIN Y (2000)
Side Air Bag: Service and Repair
Inflatable Restraint Rear Side Impact Module
TOOLS REQUIRED
^
J 39401-B SIR Deployment Fixture
^
J 38826 SIR Deployment Harness
^
An appropriate pigtail adapter
CAUTION:
^
Refer to Inflator Module Disposal Caution in Service Precautions.
^
Refer to Inflator Module Deployment Outside vehicle Caution in Service Precautions.
Deploy the inflatable restraint side impact inflator module outside of the vehicle when the vehicle will be returned to service. Situations that require
deployment outside of the vehicle include the following:
^
Using the SIR diagnostics, you determine that the inflator module does not function properly.
^
The inflator module pigtail (if equipped) is damaged.
^
The inflator module connector is damaged.
^
An inflator module connector terminal is damaged.
Deployment and disposal of a malfunctioning inflator module is subject to any required retention period.
IMPORTANT: Refer to the latest General Motors Service Bulletins before deploying a side impact inflator module.
1. Turn the ignition switch to the OFF position.
2. Remove the ignition key.
3. Put on safety glasses.
4
Inspect the J 38826 SIR Deployment Harness and the appropriate pigtail adapter for damage. Replace as needed.
5. Short the two SIR deployment harness (1) leads together using one banana plug seated into the other.
6. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
7. Remove the inflatable restraint rear side impact module if equipped.
CAUTION: Refer to Inflator Module Handling and Storage Caution in Service Precautions.
8. Place the module with the open side facing up and away from the surface on a work bench.
