DeVille DHS V8-4.6L VIN Y (2000)
9. Clear a space on the ground about 1.85 M (6 ft) in diameter for deployment to the module. If possible, use a paved, outdoor location free of
activity. Otherwise, use a space free of activity on the shop floor. Make sure you have sufficient ventilation.
10. Make sure no loose or flammable objects are in the area.
11. Place the J 39401-B SIR Deployment Fixture in the center of the cleared area.
12. Fill the fixture plastic reservoir with water or sand.
IMPORTANT: Securely hand tighten all fasteners prior to deployment.
13. Mount the module (2) in the SIR deployment fixture (3) with the open side facing up using the following mounting method.
14. To mount, use two M 6 x 1.0 nuts (1) with washers in order to secure the module (2) to the deployment fixture 3) brackets (4).
15. Extend the SIR deployment harness and adapter to full length from the module.
16. Place a 12 V minimum/2 A minimum power source (i.e., vehicle battery) near the shorted end of the harness.