DeVille DHS V8-4.6L VIN Y (2000)
Knee Diverter: Service and Repair
Knee Bolster Bracket Replacement - Left
REMOVAL PROCEDURE
CAUTION: Refer to SIR Service Precautions Caution in Service Precautions.
1. Remove the left sound insulator.
2. Remove the knee bolster trim panel.
3. Remove the four fasteners (1) securing the knee bolster bracket to the IP lower.
4. Remove the knee bolster bracket (2).
INSTALLATION PROCEDURE
1. Align the knee bolster bracket (2) to lower the IP.
2. Install the four fasteners (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the knee bolster trim panel.
4. Install the left sound insulator.
