DeVille DHS V8-4.6L VIN Y (2000)
9. Inscribe a mark on the seat back frame above the upper trim retaining bracket in order to ensure proper alignment of the bracket during
reassembly.
10. Remove the fastener (2) from the upper seat belt retractor (1).
11. Remove the upper seat belt retractor (1) from the seat frame.
12. Remove the push pin retainer (1) from the front edge of the lower seat belt retractor trim cover (2).
13. Release the rear of the lower seat belt retractor trim cover (2) and remove the lower seat belt retractor trim cover.
14. Release the tabs and remove the lower seat belt guide (1) from the lower seat belt retractor.
