DeVille DHS V8-4.6L VIN Y (2000)
8. Install the upper trim retaining bracket (1). Align the upper trim bracket with the mark inscribed during disassembly.
IMPORTANT: The upper trim bracket must be parallel with the seat back frame upper cross member in order for the remaining trim to fit properly.
9. Position the upper shoulder belt retractor over the height adjuster roller
Ensure that the seat belt is not twisted.
10. Install the upper shoulder belt retractor (1). Ensure that the anti-rotation tab on the seat belt retractor and the upper trim retaining bracket are
located properly on the seat frame before tightening the retractor fastener.
11. Install the fastener (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fastener to 55 N.m (41 lb ft).
12. Install the upper trim retainer over the upper shoulder belt retractor.