DeVille DHS V8-4.6L VIN Y (2000)
5. Route the wheel speed sensor jumper (4) through the engine compartment to the wheel well.
6. Using the strap (1), secure the wheel speed sensor jumper (2) to the HVAC lines (3).
7. Raise the vehicle. Refer to Vehicle Lifting.
8. Install the wheel speed sensor connector (7) to the wheel speed sensor (6).
9. Install the harness grommet (3) to the strut bracket (5).
10. Install the harness grommet (1) to the rail bracket (2).
11. Install the harness clip (4) to the rail bracket (2).
12. Install the right front wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
13. Lower the vehicle. Refer to Vehicle Lifting.
14. Perform the ABS Diagnostic System Check. Refer to A Diagnostic System Check - ABS.See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check
