DeVille DHS V8-4.6L VIN Y (2000)
Suspension Control Module: Service and Repair
Electronic Suspension Control Module Replacement
Removal Procedure
1. Remove the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
2. Move the rear seat back insulator aside.
3. Disconnect the electrical connectors from the CVRSS module (2).
4. Depress inward on the locking tabs (2).
5. With the locking tabs (2) depressed, slide the CVRSS module (1) towards the center of the vehicle.
6. Remove the module (1) from the bracket.
Installation Procedure