DeVille DHS V8-4.6L VIN Y (2000)
Steering Gear: Service and Repair
Power Steering Gear Heat Shield Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove two bolts securing the heat shield.
3. Remove the power steering gear heat shield.
Installation Procedure
1. Install the power steering gear heat shield.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the two bolts securing the heat shield.
Tighten the heat shield bolts to 9 Nm (79 inch lbs.).
3. Lower the vehicle.