DeVille DHS V8-4.6L VIN Y (2000)
4. Remove the boot clamp (1) from the rack and pinion boot with side cutters.
5. Discard the boot clamp (1).
6. Remove the rack and pinion boot (1) from the rack and pinion gear assembly (2).
7. Inspect the rack and pinion boot (1) for damage.
8. Look for gear oil leakage inside the rack and pinion boot (1).
9. Drain the oil.
10. Clean the rack and pinion boot (1) with solvent.
Assembly Procedure
-
Tools Required
-
J22610 Service Boot Clamp Installer
1. Install the new boot clamp (2) onto the rack and pinion boot (1).
