DeVille DHS V8-4.6L VIN Y (2000)
5. Install the engine frame insulator retainer bolts (3) in order to retain the engine frame (2) to the vehicle.
Tighten the retainers to 191 N.m (141 lb ft).
6. Raise the vehicle away from the jack stands supporting the engine frame.
7. Install the fasteners in order to retain the rear transaxle mount (1) to the bracket.
Tighten the retainers to 50 N.m (37 lb ft).
8. Install the fastener in order to retain the front engine mount to the engine frame.
Tighten the fastener to 41 N.m (30 lb ft).
9. Install the fasteners in order to retain the rack and pinion to the engine frame.
Tighten the retainer bolt to 120 N.m (89 lb ft).
10. Install the bracket (2) to retain the power steering line (1) at the engine frame.
11. Install the retainer clips (3) retaining power steering line (4) along engine frame rail.
