DeVille DHS V8-4.6L VIN Y (2000)
6. Disconnect the wheel speed sensor electrical connector from each wheel.
7. Release the park brake cable from brake calipers.
8. Loosen the parking brake cable (1) and then disconnect the cable at the rear suspension support assembly.
9. Disconnect the electrical connectors from the support assembly.
10. Remove the electronic level control electrical connector and vent hose.
11. Disconnect the electronic level control link from the left and right control arm (if equipped).
12. Remove the electronic level control vent tube from the electronic level control compressor.
13. Support the rear suspension support assembly with a transmission jack and securely support.
14. Remove the center support brackets (1).
