DeVille DHS V8-4.6L VIN Y (2000)
5. Install the wrap around four wires and secure with two harness ties.
6. Install four wires in the harness tie and install the harness tie on the air compressor head with, the bolt.
Tighten the bolt to 3 Nm (26 inch lbs.).
7. Install the air dryer. Refer to Automatic Level Control Air Dryer Replacement
8. Install the heat shield and the harness tie on the air compressor bracket with the two bolts.
Tighten the bolts to 4 Nm (35 inch lbs.).
9. Connect the air compressor connector to the connector anchor.
10. Install the air compressor on the vehicle. Refer to Air Compressor Replacement.
