DeVille DHS V8-4.6L VIN Y (2000)
4. Disconnect the wheel speed sensor connector.
5. Remove the wheel speed sensor bracket from the dust shield.
6. Remove the brake line bracket from the strut.
Notice: Care should be taken to avoid chipping or scratching the coating when handling the suspension coil spring. Damage to the coating can cause
premature failure.
7. Scribe the strut to knuckle. Refer to Strut and Knuckle Scribing.
8. Remove the strut to knuckle bolts.
9. Remove the strut from the vehicle.
Installation Procedure