DeVille DHS V8-4.6L VIN Y (2000)
7. Install the following parts:
^
The selective washer(133)
^
The thrust washer (132)
^
The case extension seal (126)
^
The case extension (134)
8. Apply pipe thread sealant GM P/N 12346004 to bolt threads before installation. Install the case extension bolts (128, 129).
9. Hand tighten the bolts (128, 129) until the case extension (134) is seated onto the case.
10. Install the long J25025-7A and the J8001.
11. Position the dial indicator with the stem contacting the output shaft (112). Set the dial indicator to zero.
12. Insert the J28585 through the vehicle speed sensor bore and lift the speed sensor rotor for measurement. Protect the bore with a piece of wood or a
suitable piece of plastic.
