DeVille DHS V8-4.6L VIN Y (2000)
4. Unsnap the shift cable terminal from the shifter pin.
5. Remove the shift cable bolt and cable from the shifter.
6. Disconnect the BTSI wire harness connector from the BTSI solenoid.
7. Disengage the locking tab on the park lock cable and lift the cable out of the slot in the shifter.
8. Unhook the park lock cable from the park lock cam on the shifter.
9. Disconnect the shifter backlight wire harness connector.
10. Remove the shifter fasteners.
11. Spread the console side panels apart and remove the shifter assembly.
Installation Procedure
1. Spread the console side panels apart and install the shifter assembly.
Notice: Refer to Fastener Notice in Service Precautions.