DeVille DHS V8-4.6L VIN Y (2000)
Rear Side Door Window Front Channel Replacement
Rear Side Door Window Front Channel Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Standard) (See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Panel Replacement/Rear Side Door Trim Panel Replacement (Standard)) .
2. Remove the door module. Refer to Door Control Module Replacement.
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair) .
4. Reconnect the power window switch and module.
5. Raise the window to the full up position.
6. Remove the upper and lower fasteners (2).
7. Rotate the front window channel (1) forward.
8. Remove the front window channel (1) through the front access hole of the inner door panel.
Installation Procedure
1. Install the front window channel (1) through the front access hole of the inner door panel.
2. Rotate the front window channel (1) rearward and align on the lower edge of the window.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the upper and lower front window channel fasteners.
Tighten the fasteners to 9 N.m (80 lb in).
4. Lower the window to the full down position.
5. Disconnect the power window switch and module.
6. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair) .
7. Install the door module. Refer to Door Control Module Replacement.
8. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Standard) (See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Panel Replacement/Rear Side Door Trim Panel Replacement (Standard)) .
