DeVille DTS V8-4.6L VIN 9 (2002)
Installation Procedure
1. Install the stud plate (1) to the vehicle.
2. Install the stud plate retainer (2) in order to secure the stud plate (1) to the vehicle.
3. Install the front bumper impact bar bracket (3) to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the nuts (2) in order to secure the front of the front bumper impact bar bracket (3) to the vehicle.
Tighten the nuts to 50 N.m (37 lb ft).
5. Install the nut (1) in order to secure the rear of the front bumper impact bar bracket (3) to the vehicle.
Tighten the nuts to 50 N.m (37 lb ft).
6. Install the radiator. Refer to Radiator Replacement in Engine Cooling.
7. Install the front bumper impact bar (1) to the vehicle.
8. Install the bolts (2) in order to retain the front bumper impact bar (1) to the vehicle.
Tighten the retainer bolts to 25 N.m (18 lb ft).
9. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper (See: Front Bumper Cover / Fascia/Service and Repair/Fascia
