cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Keyless Entry Transmitter Battery|Service and Repair|Page 10795 > < Keyless Entry Receiver|Locations|Page 10790
Page 1
background image

Keyless Entry Transmitter Battery: Service and Repair

TRANSMITTER BATTERY REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT:  Replace the battery when the range of the transmitter decreases to less than 7 m (23 ft).

1. Insert a small coin between the 2 halves of the transmitter case at the slot provided near the key ring hole.
2. Twist the coin in order to open the case.
3. Open the transmitter case.

4. Remove the battery (2).

INSTALLATION PROCEDURE

Keyless Entry Transmitter Battery|Service and Repair|Page 10795 > < Keyless Entry Receiver|Locations|Page 10790