DeVille DTS V8-4.6L VIN 9 (2002)
3. Remove the pass through from the seat back.
Installation Procedure
1. Support the seat back by the lower mounting attachments in order to avoid the pass through door from binding after the fasteners are tightened.
2. Install the pass through to the seat back.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the pass through fasteners (1) and tighten to:
*
Tighten the lower pass through fasteners to 11.75 N.m (104 lb in).
*
Tighten the upper pass through fasteners (1) to 7 N.m (62 lb in).
4. Ensure the pass through door operates properly.
5. Install the seat back into the vehicle. Refer toSeat Back Replacement - Rear (1st Design ) (See: Seat Back Replacement - Rear (1st Design ))Seat
Back Replacement - Rear (2nd Design) (See: Seat Back Replacement - Rear (2nd Design)) .
Seat Back Latch Release Cable Replacement - Rear (1st Design)
Seat Back Latch Release Cable Replacement - Rear (1st Design)
Removal Procedure