DeVille DTS V8-4.6L VIN 9 (2002)
7. Install the seat switch trim plate.
8. Install the knobs to the switches.
9. Align the front seat cushion and frame assembly with the seat adjuster.
10. Connect the front heated seat cushion electrical connectors and the lumbar air lines, if equipped.
11. Engage the rear of the seat cushion and frame assembly to the seat adjuster, push down on the front of the cushion in order to engage the studs in
the seat adjuster.
Notice: Refer toFastener Notice in Cautions and Notices.
12. Install the seat cushion and frame assembly fasteners.
Tighten the fasteners to 9 N.m (80 lb in).