DeVille DTS V8-4.6L VIN 9 (2002)
Important: Note the location of the caliper pin bolts. The upper caliper pin bolt, has a bushing as part of the assembly. The lower caliper pin bolt, is
a solid design pin bolt.
13. Remove the caliper pin bolts (1). Note the location of the caliper pin bolts. The upper caliper pin, has a bushing as part of the assembly. The lower
caliper pin bolt, is a solid design pin bolt.
14. Remove the caliper (2) from the rotor and the caliper bracket (3).
15. Inspect the caliper bolt boots in the caliper bracket for the following conditions:
^
cuts
^
Tears
^
Deterioration
Replace any damaged the caliper bolt boots.
Installation Procedure
1. If reusing the brake caliper pin bolts, wipe the old grease from the brake caliper pin bolts with a clean shop towel.
Important: DO NOT apply lubricant to the brake pad hardware.
2. Apply a thin coat of NIGLUBE(R) grease to the brake caliper pin bolts. It is not necessary to apply lubricant to the brake pad hardware or the
threads of the pin bolts.
3. Install the brake caliper (2) over the brake pads into the brake caliper bracket (3).
