DeVille DTS V8-4.6L VIN 9 (2002)
13. Remove the brake caliper pin bolts.
14. Remove the brake caliper.
Installation Procedure
1. If reusing the brake caliper retainers and sleeves, clean the sleeves using denatured alcohol, or equivalent.
2. Apply a thin coat of hi temperature silicone tube to the brake caliper retainers and sleeves.
3. Install the brake caliper over the brake pads and into the brake caliper bracket.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the brake caliper pin bolts.
^
Tighten the brake caliper pin bolts to 31 Nm (23 ft. lbs.).