DeVille DTS V8-4.6L VIN 9 (2002)
7. Remove the brake hose bolt from the brake caliper.
8. Remove the brake hose from the brake caliper.
9. Remove and discard the two copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end.
10. Install a rubber plug into the brake hose bolt hole of the brake caliper in order to prevent brake fluid loss and contamination.
11. Remove the hose bracket bolt from the strut assembly and remove the hose.
Installation Procedure
1. Remove the rubber plug from the brake hose bolt hole of the brake caliper.
Important: Install NEW copper brake hose gaskets.
2. Assemble the brake hose bolt and the NEW copper brake hose gaskets to the brake hose.
