DeVille DTS V8-4.6L VIN 9 (2002)
Brake Hose/Line: Service and Repair
Brake Hose Replacement - Rear
Brake Hose Replacement - Rear
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Clean all dirt and foreign material from the brake hose and the brake pipe fittings.
Important: Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and contamination.
4. Remove the brake pipe fitting from the brake hose.
5. Use a flat-bladed tool in order to remove the brake hose retainer from the brake hose.
6. Remove the brake hose from the brake hose bracket.
