DeVille DTS V8-4.6L VIN 9 (2002)
11. Remove the left closeout insulator panel.
12. Remove the left knee bolster.
13. Remove the left knee bolster bracket.
14. Remove the vacuum brake booster retainer clip (3) from the brake pedal clevis pin.
15. Remove the foam spacer (2) from the brake pedal clevis pin.
16. Disconnect the vacuum brake booster push rod (1) from the brake pedal clevis pin.
17. Remove the vacuum brake booster mounting nuts (1) from the brake pedal assembly.
18. Remove the vacuum brake booster assembly.
19. Remove the vacuum brake booster mounting gasket, if gasket replacement is necessary.
Installation Procedure
1. Install the vacuum brake booster mounting gasket to the booster, if removed previously.
