DeVille DTS V8-4.6L VIN 9 (2002)
INSTALLATION PROCEDURE
1. Connect the electrical connector to the cruise control module (1).
2. Install the cruise control cable (3) to the cruise control module assembly buckle (2).
3. Snap the cruise control cable (3) into the cruise control module (1).
IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts
the cable. Refer to Cruise Control Description and Operation for the complete operational details.
4. Install the cruise control cable (2) to the engine bracket.
5. Verify that the tab on the cable is engaged.
6. Hold the throttle open and slide the cruise control cable fitting (2) onto the throttle cam pin (1).
7. Install the clamps around the cruise control cable (1) and the accelerator cable.
