DeVille DTS V8-4.6L VIN 9 (2002)
Notice: Refer to Fastener Notice in Service Precautions.
Important: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation.
The use of longer bolts will damage the radiator end tanks.
4. Install the condenser mounting bolts.
^
Tighten the bolts to 13 Nm (115 inch lbs.).
5. Connect the lower engine oil cooler line to the radiator.
^
Tighten the line to 18 Nm (13 ft. lbs.).
Important: Ensure the transaxle oil cooler line is positioned upwards while tightening.
6. Connect the lower transaxle oil cooler line to the radiator.
^
Tighten the line to 35 Nm (26 ft. lbs.).