DeVille DTS V8-4.6L VIN 9 (2002)
9. Support the engine assembly with a suitable jack.
10. Remove the nut securing the right engine mount to the right engine mount bracket.
11. Lower the engine assembly to obtain clearance for the J 41816 below the body rail.
12. Place the remover pilot into the end of the crankshaft.
13. Remove the crankshaft balancer using the J41816.
14. Clean and inspect the crankshaft balancer.
Installation Procedure
1. Position the crankshaft balancer on the nose of the crankshaft.