DeVille DTS V8-4.6L VIN 9 (2002)
Valve Cover: Service and Repair
Camshaft Cover Replacement (Left)
Camshaft Cover Replacement- Left
^
Tools Required
-
J 38185 Hose Clamp Pliers
-
J 38823 Water Pump Drive Pulley Installer
-
J 38825 Water Pump Drive Pulley Remover
Removal Procedure
1. Remove the fuel injector sight shield.
2. Partially drain the cooling system.
3. Position the J 38185 (2) to the clamp in order to remove the radiator inlet hose (1) from the water housing crossover.
4. Disconnect the PCV fresh air tube (1) from the camshaft cover.
5. Remove the Ignition coil cassette.
