DeVille DTS V8-4.6L VIN 9 (2002)
11. Remove the frame rail bolts retaining screws.
12. Raise the vehicle.
13. Push up on the frame rail bolts in order to clear the mount as the top of the mount is tilted away from the vehicle.
14. Remove the right engine mount.
Installation Procedure
1. Position the right engine mount to the right motor mount support bracket.
2. Push up on the frame rail bolts in order to clear the mount as the mount is rotated into the proper position.
3. Lower the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the frame rail retaining screws.
^
Tighten the screws to 4 Nm (35 inch lbs.).
5. Raise the vehicle.
