DeVille DTS V8-4.6L VIN 9 (2002)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
^
Tools Required
-
J 42841 Crankshaft Rear Oil Seal Remover
-
J 42842 Crankshaft Rear Oil Seal Installer
Removal Procedure
1. Remove the flywheel.
2. Place the J42841 on to the crankshaft.
3. Install the J42841 retaining bolts.
4. Using a drill motor, variable speed preferred, with a socket adapter, install eight one-inch self-drilling screws into the seal using the guide holes in
the removal tool. When drilling, make sure you reduce the drill speed when the screw begins threading into the seal.