DeVille DTS V8-4.6L VIN 9 (2002)
^
Tools Required
-
J 44212 Camshaft Holding Tool
Removal Procedure
1. Remove the right secondary camshaft drive chain.
2. Remove the left secondary drive chain tensioner.
3. Remove the left camshaft cover.
4. Ensure both camshaft sprocket drive pins are at the top of their rotation.
Caution: Refer to Camshaft Holding Tool Caution in Service Precautions.
5. Install the J 44212 over the camshafts.
6. Use an open end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when removing the camshaft sprocket
bolt.
