DeVille DTS V8-4.6L VIN 9 (2002)
3. Install the left intake camshaft sprocket into the left secondary camshaft drive chain.
4. Install the left intake camshaft sprocket onto the camshaft. The camshaft sprocket notch marked LI (left intake) engages the intake camshaft pin.
5. Use an open end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when tightening the camshaft sprocket
bolt.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the left intake camshaft sprocket bolt.
^
Tighten the camshaft sprocket bolt to 120 Nm (89 ft. lbs.).
7. Remove the J 44212 from the camshafts.
8. Install the left camshaft cover.
9. Install the left secondary drive chain tensioner.
10. Install the right secondary camshaft drive chain.
Secondary Camshaft Drive Chain Replacement - Right
Secondary Camshaft Drive Chain Replacement-Right