DeVille DTS V8-4.6L VIN 9 (2002)
1. Place a small amount of sealant GM P/N 12345739 or equivalent at the split line of the upper and lower crankcases (1).
2. Place the engine front cover gasket over the crankcase dowel pins.
3. Place the engine front cover in position on the crankcase.
4. Install the engine front cover retaining bolts.
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the engine front cover bolts in the sequence shown.
^
Tighten the engine front cover bolts in proper sequence to 10 Nm (89 inch lbs.).
6. Install the crankshaft balancer.
7. Install the right engine mount bracket.
8. Install the drive belt idler pulley.
