DeVille DTS V8-4.6L VIN 9 (2002)
3. Install the right exhaust manifold nuts.
^
Tighten the exhaust manifold nuts to 25 Nm (18 ft. lbs.).
4. Install the heated oxygen sensor.
5. Raise the engine cradle into position.
6. Install the 4 rearward engine frame-to-body bolts.
^
Tighten the engine frame bolts to 191 Nm (141 ft. lbs.).
7. Remove the screw jack.
8. Install the nut securing the left transaxle mount to the left transaxle mount bracket.
^
Tighten the transaxle mount nut to 80 Nm (59 ft. lbs.).
9. Install the nut securing the right engine mount to the right engine mount bracket.
^
Tighten the engine mount nut to 80 Nm (59 ft. lbs.).
